Guide for Zaptec
In this guide, we will show you how to install a Zaptec charging station easily and quickly. See everything you need below.
Guide Zaptec
Content configuration package
- EVSE ID
- Online guide for Zaptec
- Envelope with the QR code for the end customer
Installer requirements
- Laptop, tablet or smartphone with internet connection.
- EVSE ID
- Online guide Zaptec
Follow the steps
1. Go to the Zaptec portal: https://portal.zaptec.com/
2. Login with your data (same data as the Zaptec app.) 3. Go to installations:
4. Select your installation
5. Click on settings and select the Login tab
6. Choose OCPP-J 1.6 login
7. Enter the URL: ws://ocpp.e-flux.nl/1.6/e-flux/{deviceId}
For a single charger you can go to the OCPP Settings of a charger and fill in the following URL: ws://example.com/ocpp/my_device
8. No password is required to set up E-Flux
9. Perform a reset
10. Are you the installer of the charging station? Continue with step 2 on the flyer. Are you the owner of the charging station? Call E-Flux after the reset has been fulfilled to check whether the charger has come online at E-Flux. +31 (0)85 0185243
Only for the owner of the charging station
11. Register your charging station by scanning the QR code on the 'Ready to Charge' envelope or go to https://www.e-flux.io/signup.