Guide for Smappee
In this guide, we will show you how to install a Smappee charging station easily and quickly. See everything you need below.
Guide Smappee
Content configuration package
- EVSE ID
- Online manual Smappee EV Base/Wall
- Envelope with the QR code for the end customer
Installer requirements
Volg de stappen
Stap 1: Log in with partner account received from Smappee at https:/dashboard.smappee.net/login Not received a partner account? Then create an account via the 'Smappee Energy Monitor' app.
You can download it for IOS and ANDROID
Stap 2: Account created? Then log in via your laptop: https:/dashboard.smappee.net/login (Not via the mobile )
Stap 3: Click on '+' Add board' on the left side
Stap 4: Fill in the settings of the new board as shown in Figure 1
Step 5: You will now enter the management screen of your linked charging station. Step 6: Select the charge point and scroll down until you see the same screen as image 2 Step 7: Click on the pen to the right of: 'session activation method'.
Stap 8: Then enter 'Swipe and load' - 'Load public' - 'Other CSMS' and add this link ws://ocpp.e-flux.nl/1.6/e-flux in (Look at picture 3 here). You can also turn on multiple settings here.
Stap 9: Contact E-Flux (+31 (0)20 76306 20) to ask whether the charging station has connected to our platform. Please provide the EVSE ID or the serial number for this purpose.
Stap 10: E-Flux approves the charger. Register the charging station by scanning the QR code on the envelope ''Ready to charge?" or by going to www.e-flux.nl/instructies-account/.
Image 1
Image 2
Image 3