Manual for ABB Terra AC
On this page, you will find the right manual to connect an ABB charging station to the E-Flux platform. Follow the step-by-step guide below to connect the charging station.
Guide ABB Terra AC
Content configuration package
- Nano SIM card (optional)
- EVSE ID
- Online manual Wallbox ABB Terra
- Envelope with the QR code for the end customer
Installer requirements
Follow the steps
Step 1: Send an email to [email protected] with your email address and a username at least one day before the installation takes place. This is necessary because E-Flux will create an account for you with which you can log into the app and access the E-Flux settings. After E-Flux has created an account for you, you will receive an email with a temporary password. Be careful! This email may end up in your spam and has a special sender: noreply.autosender
Step 2: Download the app and log in with the temporary password and username you provided. You can find this in the mail.
Step 3: Before you can proceed, you must first renew the password.
Step 4: Connect the charging station by clicking 'Connect Charger'. The charger will appear with the serial number. Click on it and enter the 8-digit code written on a white sheet (sticker) provided with the charging station. Then click save.
Step 5: Once the charger is connected, it is important that the firmware on the charging station is up-to-date. You do this by clicking on 'Device Sync', then check under firmware info that the most recent version is set.
Step 6: Under Configuration, click on 'OCPP Server' to connect the charging station to E-Flux. (If you have a working internet connection and you see the bottom two lights on the charging station turn green, you can connect the charging station to E-Flux).
Step 7: Press 'enable external access'. If you got an account from E-Flux, you can select the E-Flux server. Click OK and restart the charging station.
Step 8: Enable RFID: go to device settings, click nfc device settings and click enable.
Step 9: After 5 minutes, contact E-Flux (+31 (0)20 76306 20) to check whether the charging station has connected to our platform. Please provide the serial number of the charging station for this purpose.
Step 10: E-Flux approves the charger. Then register the charging station by scanning the QR code on the "Ready to charge?" envelope or by going to www.e-flux.nl/instructies-account/.