Guide for Alfen
In this guide, we will show you how to install an Alfen charging station easily and quickly. See everything you need below.
Guide Alfen
Content configuration package
- Simcard
- EVSE ID
- Online guide Alfen NG
- Envelope with the QR code for the end customer
Installer supplies
- UTP cable
- Online guide charing station Alfen NG
- Windows laptop with UTP connection running the following programmes:
Follow the steps
Step 1: Make sure a configuration pack has been ordered from E-Flux with a SIM card and EVSE ID if an E-Flux SIM card is not already inserted in the charging station. Step 2: Grab your laptop and download the ace service installer (NG). To do this, go to the Alfen website https://alfen.com/nl/downloads -> Charging stations EV -> Service installer Setup 3.5.3 (for NG platform). Step 3: Login with the following data: Username: radomskiR Password: fazUv6 Step 4: Connect your charging station to your laptop by connecting the UTP cable. Step 5: Once you are logged in, select the relevant charging station on the left. Step 6: Once you have clicked on the charging station in question, you will be asked for a password. This password can be found on the flyer included in the box of the charger. Step 7: Select the charging station icon (the 6th in the row). Step 8: Under back office preset, click on E-Flux platform (in addition, under connect method, click on 'mobile' and under protocol on 'OCPP 1.6'). Step 9: Click on save. Step 10: Click the reboot button above the Alfen logo (see image).
Are you the end customer? Do the following: Once the reboot is complete, call E-Flux (+31 (0)20 76306 20) to verify that the connection to the eMobility platform has been made. (Wait a few minutes before calling). Step 12: Register the charging station by scanning the QR code on the 'Ready to charge?' envelope. Or go to: https://www.e-flux.nl/instructies-account/